Christmas Tree Toppers!

Need something new for your tree? Try one of our ornaments or even a special piece to use as your tree topper. Many people are looking outside the box for Christmas and we have a wide variety. You can use either Acrylics or Glazes to finish your piece (the only difference is the shine). Since this will only go on a tree it is safe to use both types of paints. There is still plenty of time to get something special made for yourself or for a friend or loved one.


Things to remember when using glaze

The first thing you need to do when glaze is being used is to wipe down or wash the piece with clean water.  Make sure you remove all the dust and any loose particles.  Also, make sure your hands are clean and make sure lotion and any oils from your skin do not come in contact with the piece you are working on.  When the piece has been washed the glaze goes on smooth and does not dry as fast leaving a nice finish.  Any dust may leave pin holes in the finish.

Always read the label on the bottle of glaze you are using.  Some glazes, like underglaze, need to be top coated.  Others do not.  The number of coats you use make colors solid or transparent.  Using a good brush made for glaze helps leave a smooth finish.  Never over work the glaze.  Put down even coats keeping a wet edge then move on so you don't pull off the glaze you already applied.  Let the glaze dry between coats.  If the glaze is thick and will not flow well add a few drops of water or mix a brush load of water into the puddle on your pallet.  Don't have a pallet use a lid from a plastic container or aluminum foil.  That will prevent contaminating the bottle of glaze.  It's always helpful to have a container of water or two to clean brushes and thin the glazes.  A squeeze bottle like a dish soap bottle works well.  It doesn't spill as easily.  Oh, don't forget to screw the lid on the glaze before shaking when mixing.  Yeah, it happens to all of us.

There are many ways to finish a project.  Looking to finish a textured surface like rock?  Apply glaze then wipe off the glaze leaving the color in the crevices.  You can use a sponge to apply glaze.  To finish the inside of an item, thin the glaze with water and pour it inside, roll it around and dump it out.  Let it drip for a few moments and your done.  

Hope this is helpful and stop in for visit or sit down and do a project.  

Welcome to JonesWorksLLC

Christmas is over for another year but you can still get Christmas at our store.  We have trees and everything you need to fix one up or make one for next year.

If you need the lites for a tree bring one in so we can match up the size.

When you glaze a tree run a drill bit in each hole so the glaze doesn't fill up the holes and the lites will fit.

Need a base?  Bring in the tree so we can make sure the one you want will fit the tree.

If you want a white tree use clear glaze.

Need some help?  Stop in or glaze your tree at our site.  We will fire the tree and all you will need to do is put in the lites.  You can do that here also.  Don't forget a star.